TB Carb Kit, Nibbi PE24mm, w/Air box delete Bracket – Stock Head KLX110

Name: TB Carb Kit, Nibbi PE24mm, w/Air box delete Bracket - Stock Head KLX110
SKU: TBW9370
Availability: OutOfStock

$209.99

TB Carb Kit, Nibbi PE24mm, w/Air box delete Bracket – Stock Head KLX110

Out of stock

Get notified when product is back in stock

SKU: TBW9370 Categories: - Kawasaki -, KLX110/ KLX110L/ DRZ110, KLX110/ KLX110L/ DRZ110 Carb & Fuel, KLX110/ KLX110L/ DRZ110 Engine

Description

TB Carb Kit, Nibbi PE24mm, w/Air box delete Bracket – Stock Head KLX110

Nibbi PE24 with TBparts manifold/carb kit: Nibbi helped perfect the simple design of the PE24! Starting with looks, they come hard anodized black. This helps with corrosion resistance, wear resistance, insulation, heat resistance and hardness/strength of the carburetor. The air passage starts out anodized then transitions into a smooth polished finished for optimal power and smooth consistent power. The lightweight hardware is also anodized. Another huge benefit is the splash guard. It keeps the engine operating smooth under bumpy riding. Making them an AMAZING value overall! Paired with our large intake manifold for the OEM cylinder head. This will give you some of the best throttle response and consistent reliable power on the market! We also include a low profile air filter and extended throttle cable.

Kit Includes:

Air Box Delete Bracket
Nibbi PE24 Carb
Intake Kit ported to match the stock KLX head
Pilot jet #32, 35, 38, 40
Main Jet #98, 100, 102, 105, 108, 118, 122
Jets installed #105/#40
Throttle Cable +2.75″
Dual Layer Foam Air Filter

Key Features

Air Box Delete Bracket
Air Passage is mostly, Polished round slide for improved throttle response, overall smoothness, and stability in use.
Lightweight anodized hardware.
Huge splash guard for smooth operation.
Anodized, which greatly improves the corrosion resistance, wear resistance, insulation, heat resistance and hardness or strength of the carburetor.
+2.75″ Extended Cable for use with standard or tall bars

Install Notes:

Use TBW1740 TB Intake Boot, 30x58mm (Extra intake boot included)
DOES NOT REUSE AIR BOX
Reuse OEM heat stop/spacer
Tuning required. Make sure the air fuel screw is 1.5 turns out from bottom before you start tuning.

There are no installation instructions, but if you can replace your piston, you can install this kit. If you don’t have any experience working on your engine, we highly recommend having a professional technician install this kit or, at a minimum, purchasing the shop manual for your bike available from your local Kawasaki or Suzuki dealer. We also have a link on our website in the INFO section under KLX110 where you can download the shop manual. The parts are installed in the same or similar manner as the OEM parts.