TB Performance Exhaust 3 – Z50 K3-99 Models

TB Performance Exhaust 3 – Z50 K3-99 Models

Performance exhaust with Matte Black Can for all Z50 models from 1972 and up. It’s a very high quality exhaust and also comes with an optional silencer cone. This is a must have item when putting on one of our 88cc thru 117cc bore (and stroker) kits on your Z50 as the stock exhausts are way too restrictive. Very impressive performance and sounds great too!

Note: In the pictures, the exhaust tip appears to point up, but when mounted its even with the can.

Important Note: This exhaust will bolt on and fit the 88-99 Z50R models perfectly. However, it will require some mods for the rear fender – exhaust tape to prevent the exhaust from rubbing the plastic directly and possibly wiring the forward fender mount (to prevent from popping out of the grommet). On the 80-87 Z50R, you can either just not run the right side number plate (like on the 79 models that didn’t use a plate on this side) or use spacers to move the number plate bracket out.

TBparts.com is the only distributor of our products and the parts are shipped directly from the manufacturing facility to us. When a product is purchased from us, it has not gone through several middlemen and thus, the savings goes to the consumer. Additionally, to keep prices down, we use basic packaging and installation instructions are not included. The end result is affordable and high quality performance parts that will add some power and excitement to your bike!